Armide report Sept 17th 2018

Brass cowl vents installed on the starboard dorade box

Note grab bar attached to the compass pedestal

Aft deck works nearing completion with steering wheel installed for checks on the new pedestal.

Compass octagon with engine and bow-thruster controls

Compass octagon with engine and bow-thruster controls

Note grab bar attached to the compass pedestal

Skylight lifters installed with teak moulding strip at junction between skylight & deck beams

Skylight lifters installed with teak moulding strip at junction between skylight & deck beams

Oregon pine mast cover for the AIS GPS antenna

Installing the vent grilles flush in the interior joinery panels

Installing the vent grilles flush in the interior joinery panels

Hardware details on the doghouse doors

Powder coated gammon iron with bowsprit

Hardware details on the doghouse doors

Hardware details on the doghouse doors

Hardware details on the doghouse doors

Aft deck details showing steering wheel from aft

Interior panelling fresh from the paint cabin

... and aft deck grating installation

Masthead electronics with windex, navigation light and antenna.

Masthead electronics with windex, navigation light and antenna.

Masthead electronics with windex, navigation light and antenna.

Masthead electronics with windex, navigation light and antenna.

Beige rope cable cover

Deck light with Oregon pine cable cover

Aft grating reinforcing plate

... and inner forestay deck fitting during final installation

Cabling details at the chart table

Meljac light switch detail in the main saloon.

Stanchions, stanchion leg and lifelines installation

Stanchions, stanchion leg and lifelines installation