Armide report April 30th 2018

>Spray application of Awlgrip Hullguard extra primer to the topsides

Awlgrip Fair filler being applied onto the Hullguard

545 primer on the bulwark rail with teak capping rail dry fit in rectangular section

Selecting the teak for the capping rails using a plywood template

Long-boarding the filler on the topsides

Cutting the scarf in the end 0f section of capping rail teak.

Ply template showing the tenon positions over the bulwark stanchions in the capping rails

Forward bulwark reinforcing being glued into place

Fitting of teak shim under the aft mast deck collar.

Spreader fabrication from ash boards

Spreader fabrication from ash boards

Aft faces of teakdeck benches

Rule showing height required for bronze piece to go under the chain blocker

Bronze machine screws for securing under-shelf brackets to chain-plates

Teak blocking under windlass

Foundry patterns for navigation light bronze casings

Foundry pattern for combined stern light and ensign staff holder

Spline to cover conduit in mast at point where spar changes dimension

Conduits for electrical cabling in mainmast.

Interior joinery detail

Bonding of the doghouse teak roof

Main electrical control box behind panelling at chart table

Interior joinery detail