Armide report February 5th 2018

Original steering mechanism set up on deck for checks and measurements

Stern tube and prop shaft installation

stern gland and prop shaft at entry into the stern post. Limber hole lines also visible

Lower rudder bearing tack welded

Deep batten on port side for sheer-line and wooden stanchion checks

Lower rudder bearing during welding

Doghouse teak deck beams, carlins and half beams

Main steps detail at top in doghouse

Edge protection prior to trimming of doghouse steps

Doghouse steps being trimmed on a table saw

Oak interior joinery with ventilation slots.

Oak interior joinery with ventilation slots - back view.

Oak interior joinery with ventilation slots.

Oak interior joinery with ventilation slots - back view.

Main saloon bulkhead forward starboard

Electrical cabling installation at chart table

Drawers in owners' cabin

Bobstay fitting cut-out in stem

Veneering on underside of doghouse roof

Gueuses installées avant la demande d’isolation du plomb

Hull filling at flat zones in the topsides

Contre plaqué haut de serre

Contre plaqué de 15mm collé étanche

Contre plaqué bas sous serre collé étanche