Armide report December 18th 2017

Chain locker looking forward.

Forward teak king plank on the foredeck – dry fitting prior to gluing.

Forward teak king plank detail prior to gluing to deck plywood.

Aft king plank being cut from one length of teak using plywood template.

Foam fairing at leading edge of bow-thruster tunnel, starboard side shown, prior to glassing.

GRP laminates being applied to bow-thruster tunnel fairing pieces.

Mock-up of forward interior façade of doghouse showing computer screen and provisional positioning of navigation light display panel. The clock and barometer possibly above the display panel.

Doghouse teak dry assembly

Doghouse teak joinery works

One of two bronze rudder straps bent to pass through the blade and round the stock

Bronze lower rudder bearing dry assembly prior to assembly and welding

Sample lifeline end fitting and 6mm bronze rod lifeline.

Grey water tank bronze outlet seacock - positioning on oak reinforcing plate.

Electrical conduit passing through cut-out in bulkhead

Galley joinery

Interior panels being prepared for painting in the paint cabin